Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SNMP Configuration setup
#1
Is there any standard way to configure SNMP for the pandora server? is it necessary to be configure to work with the console and the servers that host the agents?
 Reply
#2
Hi Gabriel M.

Could you run this command from Pandora server command line:

snmpwalk -v 1 -c community ip_server

Replace community and ip_server by correct values and paste the output, please.

Regards.
 Reply
#3
I get a lot of output like this with the command ; however i didnt pasted it all cuz its a whole lot of the same type of output lines

snmpwalk -v 1 -c ccapublic 192.168.1.12


iso.3.6.1.2.1.7.5.1.1.0.0.0.0.54974 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.54985 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.54989 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55002 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55003 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55005 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55008 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55012 = IpAddress: 0.0.0.0
iso.3.6.1.2.1.7.5.1.1.0.0.0.0.55022 = IpAddress: 0.0.0.0i
iso.3.6.1.2.1.25.6.3.1.5.252 = Hex-STRING: 07 D9 04 12 0B 08 14 00
iso.3.6.1.2.1.25.6.3.1.5.283 = Hex-STRING: 07 D8 08 0F 09 03 06 00
iso.3.6.1.2.1.25.6.3.1.5.284 = Hex-STRING: 07 D8 08 0F 09 03 06 00
iso.3.6.1.2.1.25.6.3.1.5.285 = Hex-STRING: 07 DC 05 1F 0C 1D 16 00
iso.3.6.1.2.1.25.6.3.1.5.286 = Hex-STRING: 07 D8 08 0F 09 03 06 00
iso.3.6.1.2.1.25.6.3.1.5.287 = Hex-STRING: 07 DC 05 1F 0B 37 06 00
iso.3.6.1.2.1.25.6.3.1.5.288 = Hex-STRING: 07 DB 04 19 0B 22 22 00
iso.3.6.1.2.1.25.6.3.1.5.289 = Hex-STRING: 07 D8 08 0F 09 03 06 00
iso.3.6.1.2.1.67.1.1.1.1.1 = Hex-STRING: 4D 69 63 72 6F 73 6F 66 74 20 49 41 53 32 2E 30
00
iso.3.6.1.2.1.67.1.1.1.1.2 = Gauge32: 902847982
iso.3.6.1.2.1.67.1.1.1.1.3 = Gauge32: 902847982
iso.3.6.1.2.1.67.1.1.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.67.1.1.1.1.5 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.6 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.7 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.8 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.9 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.10 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.11 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.12 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.13 = Counter32: 0
iso.3.6.1.2.1.67.1.1.1.1.14 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.1 = Hex-STRING: 4D 69 63 72 6F 73 6F 66 74 20 49 41 53 32 2E 30
00
iso.3.6.1.2.1.67.2.1.1.1.2 = Gauge32: 902847982
iso.3.6.1.2.1.67.2.1.1.1.3 = Gauge32: 902847982
iso.3.6.1.2.1.67.2.1.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.67.2.1.1.1.5 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.6 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.7 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.8 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.9 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.10 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.11 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.12 = Counter32: 0
iso.3.6.1.2.1.67.2.1.1.1.13 = Counter32: 0
 Reply
#4
Ok Gabriel M.

Could you attach a screenshot with SNMP module configuration in Pandora FMS web console, please?

Paste the output of that commands:

Code:
# cat /etc/pandora/pandora_server.conf | grep snmpget
# which snmpget

Regards.
 Reply
#5
Not sure what are u asking me, i know how to use the tools to and then select SNMP for a specific device and do you want me to do the cat command from my terminal?
 Reply
#6
This is the output of  cat /etc/pandora/pandora_server.conf | grep snmpget


Attached Files


.png   Screenshot from 2012-12-17 16:59:03.png (Size: 34.17 KB / Downloads: 116)
 Reply
#7
Ok so i added few modules from via SNMP through the pandora console and they seem to have a little yellow warning sign and i also added one manually that is actually sending information, ( I have no idea what type of information) but when i added i did an snmp walk from that page and it gave me and OID and then i clicked create. Im really confuse now, does this means that is something wrong with the templates?


Attached Files


.png   SNMP_By_Module.png (Size: 108.73 KB / Downloads: 116)
 Reply
#8
Hi,

Yellow warning icon means that the module is in not initialized status, because that module has never reported data yet. If you do a snmpwalk, and you choose one OID from list, it should report data.

You can test it from server command line, running this command:

# snmpget -v 1 -c ccapublic 192.168.1.12 OID

You have to replace OID by the  string which is returning not-initialized data. Paste the output here.

Regards.
 Reply
#9
thats my main issue when i do an snmpwalk to pick my OID i get no output to choose from the SNMP Explorer page


Attached Files


.png   SNMPwalk.png (Size: 20.25 KB / Downloads: 106)
 Reply
#10
What version of Pandora FMS are you using? This seems to be a bug in an older version. Try to update to the last version.
 Reply


Users browsing this thread: 1 Guest(s)


(c) 2006-2018 Artica Soluciones Tecnológicas. Contents of this wiki are under Create Common Attribution v3 licence. | pandorafms.com | pandorafms.org

Theme © MyBB Themes